Siemens SINUMERIK 840D sl Function Manual page 745

When selecting TRANSMIT, translations of the virtual axis are deleted. Translations of the
rotary axis can be taken into account in the transformation.
Rotations:
Rotation before the transformation is taken over.
Mirroring:
Mirroring of the virtual axis is deleted. Mirroring of the rotary axis can be taken into account in
the transformation.
Scaling:
Scaling of the virtual axis is deleted. Scaling of the rotary axis can be taken into account in the
transformation.
Example:
Machine data for TRANSMIT
; FRAME configurations
$MC_MM_SYSTEM_FRAME_MASK='H41'
$MC_CHSFRAME_RESET_MASK='H41'
$MC_CHSFRAME_POWERON_MASK='H41'
$MN_FRAME_GEOAX_CHANGE_MODE=1
$MC_RESET_MODE_MASK='H4041'
;$MC_RESET_MODE_MASK='H41'
;$MC_GCODE_RESET_VALUES[7]=2
$MC_GCODE_RESET_VALUES[7]=1
$MN_MM_NUM_GLOBAL_USER_FRAMES=0
$MN_MM_NUM_GLOBAL_BASE_FRAMES=3
$MC_MM_NUM_USER_FRAMES=10
$MC_MM_NUM_BASE_FRAMES=3
$MN_NCBFRAME_RESET_MASK='HFF'
$MC_CHBFRAME_RESET_MASK='HFF'
$MN_MIRROR_REF_AX=0
$MN_MIRROR_TOGGLE=0
$MN_MM_FRAME_FINE_TRANS=1
$MC_FRAME_ADD_COMPONENTS=TRUE
; TRANSMIT is 1st transformer
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
K2: Axis Types, Coordinate Systems, Frames
; TRAFRAME, SETFRAME
; Frames are active after Reset.
; Frames are deleted for Power On.
; Frames are calculated after switchover
of the geo axis.
; Basic frame is not deselected after RE-
SET.
; Basic frame is deselected after RESET.
; G54 is the default setting.
; G500 is the default setting.
; from 5 to 100
; from 0 to 8
; No scaling when mirroring.
; Fine offset
; G58, G59 is possible.
10.5 Frames
745