Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 80

Run the System
Aliquot Module Operation
Printer States
Table 2.9
State
Ready
Printing label
Pause
Recoverable error
Non-recoverable
error
Critical error
Power save mode
Key Functions
The keys change according to the printer state:
2-44
Printer states
Ready and configured display icons
such as time and date.
Printing label and the number of the
printed label in the print job.
Pause and this icon
The type of error and the number of
labels in the print queue.
The type of error.
The type or error.
The keys are not lit.
Display Description
The printer is ready to receive data.
The printer is processing a print job.
The system can send data for a new print
job.
The new print job is queued to start when
the previous job finishes.
The operator interrupted the print job.
An error occurred that the operator can
recover.
The print job can resume after the error is
resolved.
An error occurred that cannot be resolved
without canceling the print job.
An error occurred during the system test.
• Switch off the printer and then on
again.
• Press Cancel
.
If this error persists, contact your
Beckman Coulter representative.
If the printer is not used for awhile, it
automatically switches to power save
mode.
To exit power save mode, press any key
on the navigator pad.
B67471B