Recapper Operation and Maintenance
Recapper Troubleshooting
11
Press
12
Close the recapper hood and the sliding door to the left side.
13
Select OK to confirm the AutoMate software prompt.
14
Select Yes to start initialization.
15
Continue routine operation.
Holder of Parafilm Roll is Fixed on the Top
Problem
The system alerts you.
Cause
After inserting the parafilm cassette, the holder of the parafilm was not moved down.
Solution
Set the roll holder to the
4-16
to cut the film. Remove the strip from the brushes.
Note
The AutoMate system can only resume operation when the sliding doors to the left
and right of the recapper are closed.
lower locked
position.
B67471B