Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 39

Exit
Components
The Components menu lets you initialize the following single components:
• Main control
• Drawers
• Conveyor belt 01
• Conveyor belt 02
• Host
• Volume detection
1
Select Initialize to initialize a single component.
2
After successful initialization, the system displays an alert.
Components contains various submenus.
Decapper
Recapper
Robot 1
Robot 2
Robot 3/Pump
B67471B
Menu Name
Close the application.
Menu Submenu
Initialize
Open gripper
Active
Initialize
Start maintenance
Initialize
Open Gripper
Initialize
Open gripper
Initialize
Graphical User Interface
Description
Description
Initialize the decapper.
Stop the system.
Activate or deactivate the recapper. When
reactivating, the recapper must be reinitialized.
Confirm the system prompt with
Initialize the recapper.
Put the recapper into maintenance mode.
Initialize Robot 1.
Stop the system.
Initialize Robot 2.
Stop the system.
Initialize Robot 3/pump.
2
Run the System
Yes
to initialize.
2-3