Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 4

Revision History
Release date
May 2016
February 2017
iv
Changed maintenance schedule in order to reflect cleaning requirements for EZ
Pipettor. Daily cleaning is no longer required. Daily visual inspection instead
and cleaning only as required. Changes were made to the following sections:
• Maintenance Schedule
• Clean the Tip Carrier of EZ Pipettor (GEN 2)
Changes were made to the following sections:
• Exchange the Film
on AutoMate PC.
• Remove Parafilm Jam: Added pathway to instructional video stored on
AutoMate PC.
• Start the System: Corrected information on computer position
• Replace Gripper Jaws Of The Tube
current system parts
New sections added:
• System Freeze: Added instructions on recovering from a system freeze.
• Camera Inspection
window.
• Tubes: Added topic describing the useable range of tube dimensions for
the AutoMate 2500 Family systems
• Glossary Of Standard Symbols Used In AutoMate 2500 Family System
Labels: Added list of standard symbols in use in current labels.
• Glossary Of Custom Labels Used In AutoMate 2500 Family
Added list of custom labels.
• Position Of Labels On AutoMate 2500 Family
displaying position of labels referred to in label glossary topics.
• Compliance Information:
Removed topics:
• Removed topics describing position of old labels on the AutoMate 2500
Family Systems.
• Removed topic describing Recycling Label.
Revisions
Cassette: Added pathway to instructional video stored
Gripper: Updated image to represent
Window: Added description of the camera inspection
Added topic describing new compliance label
Systems:
Systems: Added figure
B67471B