Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 11

Disconnect mains plug
Always disconnect mains plug when working on electronic parts or on parts connected to
the power supply.
Read documentation
Read and understand the documentation before operating the system.
Compliance Information
Recycling
This label is required in accordance with the Waste Electrical and Electronic Equipment
(WEEE) Directive of the European Union. The presence of this label indicates that:
1. The device was put on the European Market after August 13, 2005
2. The device is not to be disposed of via the municipal waste collection system of any
member state of the European Union
Customers must understand and follow all laws regarding the correct decontamination and
safe disposal of electrical equipment. For Beckman Coulter products bearing this label,
contact your dealer or local Beckman Coulter office for details on the take-back program
that facilitates the correct collection, treatment, recovery, recycling and safe disposal of
these products.
For the Japan Market:
This system is considered an industrial waste, subject to special controls for infectious
waste. Prior to disposal of the system, refer to the "Waste Disposal and Public Cleaning
Law" for compliance procedures.
C-Tick Mark
The C-Tick mark is intended for use on products that comply with the applicable
Electromagnetic Compatibility (EMC) standards in the Australian or New Zealand market.
CE Mark
CE marking attests the conformity of the product with the applicable requirements of the
relevant European Community harmonization legislation.
CSA Mark
B67471B
Safety Notice
Compliance Information
xi