Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 40

Run the System
Graphical User Interface
Tube Inspection
Unit
Aliquot Module
Help
Select ?, submenu System Info to view information about your software version and
licensed options.
Instructions for Use (IFU) Online Help
Select ?, submenu Help to open the Instructions for Use as on-screen help. These
Instructions for Use are identical to the current manual.
2-4
Menu Submenu
Change tip
Camera active
Initialize camera
Initialize
Initialize printer
Note
When initializing a single component or the entire system, confirm the system
prompt with Yes to initialize.
Caution
When you select Open Gripper, Robots 1 and 2 move to the front of the system
for ease of access.
Note
If you initialize Robot 1 or Robot 2 while a tube is in the gripper (for example
following an error), the system can prompt you to initialize other components.
Select Add the components and continue.
Description
Moves Robot 3 to the tip stripper,
existing tip and pick up a new tip.
Activate or deactivate the camera.
After deactivating, select a specific tube type.
Automatic Detection
After activating, select
Initialize the camera.
Initialize the label unit of the aliquot module.
Initialize the printer.
strip off the
.
B67471B