Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 151

Table 3.4
Order number
ODL25112
ODL20554
B01376
B24687
ODL03587
B72304
B72305
ODL02156
ODL02153
ODL22049
Table 3.5
Order number
B38295
B39439
B38296
B67471B
Spare parts and consumables (Continued)
Part name
Gripper clip kit
Parafilm cassette
Pipette tips
Pipette filter tips
Secondary tubes
Screw Cap tubes in a stack-pack
Screw Caps in a bag
Thermo direct labels
Thermo transfer labels
Transfer ribbon
Spare parts and consumables for MTP module
Part name
Microtube rack: 48 microtubes, 500 µl
Microtube rack: 48 microtubes, 1000 µl
Color codes for microtube racks
User Maintenance
Spare Parts and Consumables
Comment
Required for recapping tubes (only if recapper
option is installed).
Required for aliquotting. Do not contain a
filter.
Required for aliquotting.
Required for aliquotting.
Required for aliquotting Screw Cap Secondary
Tubes.
Approved caps for Screw Cap Secondary
Tubes.
Required for printing thermal direct labels on
secondary tubes. Only these thermal direct
labels are approved for use with the printer.
Required for printing transfer labels on
secondary tubes. Only these transfer labels are
approved for use with the printer.
Required for printing transfer labels on
secondary tubes.
Comment
One box containing 64 microtube racks
One box containing 54 microtube racks
Colored chips can be inserted into a slot
on the side of the microtube rack for
quick visual identification. Eight
different colors available. One pack
includes 10 different colored chips.
3
3-53