Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 61

3
When the AutoMate is in operating mode, it immediately starts distributing tubes.
Important
Resupply Partially Filled Input Drawer
1
Select the button on screen to open the drawer.
2
Load tubes behind partially filled racks or replace empty racks.
3
To continue sorting where the system stopped, select all of the racks that have been
processed, including the last rack that was being processed.
4
Close the drawer. The system resumes sorting from the first position of the input rack.
5
As the tubes are removed from the positions of the input rack, each tube place changes
from green to white, indicating a tube removal. If the process is interrupted, the system
can continue from the next available green spot.
B67471B
Do not access the input drawer during the distribution process! Stop the system
and reset the input drawer.
Run the System
Actions During Distribution
2
2-25