Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 114

User Maintenance
Conveyor Belt Maintenance
2
Remove the screw on conveyor belt 01. Access the conveyor belt from the back of the
system.
3
Lift the cover sheet (1) and move the tube holders to position (2) to remove them.
4
On conveyor belt 02, remove the two thumb screws (3). Lift the cover. Slide the tube
holder to the removal position (4).
3-16
Note
Do not bend the metal excessively. A Beckman Coulter representative can help you
remove the entire cover for thorough cleaning.
B67471B