Beckman Coulter AutoMate 2500 Series Instructions For Use Manual page 32

System Overview
Sample Processing
Table 1.3
Tube indicator
AutoMate 1250/2550 only:
Important
Place primary tubes on input racks. Input racks can be customized, but the most
common sizes are 14 mm, 17 mm, or a high-density rack that can accommodate a
combination of 14 mm and 17 mm tubes. To avoid errors, place tubes in the correct
input rack. If you need a custom solution, contact your Beckman Coulter representative
for support.
1-6
Tube status indicators on-screen (Continued)
The tube is destined for an
A primary tube to be aliquotted. The red outline indicates that this tube was
decapped.
An empty secondary container.
A secondary container processed by the aliquotter.
A reserved secondary container position on conveyor belt 02 for aliquoting.
The tube has a warning. Manual post processing might be necessary. Refer to the
tube information window for warning information and further instructions.
Description
error rack.
B67471B