Figure 4.13
17
Pull on the release knob of the guide table, then fold the guide table back to the upper
lock position:
Figure 4.14
18
Press the
depressed until the film appears at the brushes (visual check).
19
Cut off the film with the
20
Pull on the release knob of the film cassette and push the roll to the lower lock position.
21
Close the recapper hood and the sliding door to the left of it.
22
On the touch screen, select OK to confirm that you have finished servicing the recapper.
23
Select Yes to confirm the initialization prompt that appears.
B67471B
button to initiate the manual film transport and hold the button
button and remove the strip from the brushes
Recapper Operation and Maintenance
Exchange the Film Cassette
4
4-11