Sethexout() - Toshiba TS3000 Series Instruction Manual

series Robot Controller

SetHexOut()

Sets consecutive numbers starting from the specified output numbers.
Format
void SetHexOut(int dono,int length,uint value)
Argument
Int dino
Int length
Int value
Return value
Exceptions
TCPNotConnect
CommunicationError Communication Error
ControllerNG
IllegalParam
Notice
See also
GetHexIn()
First DOUT number to be set consecutively
Bit length to be fetched consecutively (1~32)
Set value
Example: The result of SetHexOut(1,4,5) is DOUT1=1, DOUT2=0,
DOUT3=1, DOUT4=0.
None
Network is not connected
Command not accepted by controller
Illegal parameter
- 72 -
TsRemoteLib.DLL MANUAL
TsRemote.method
STE85409