Stapler/Stacker Controller Card Assembly Removal - Lexmark MB790MFP Service Manual

Stapler/stacker controller card assembly removal

1. Remove the left left cover. See
2. Disconnect all harnesses to the controller card.
3. Remove the three screws (A) securing the stapler/stacker controller card assembly.
4. Remove the stapler/stacker controller card assembly.
MFP stapler assembly paddle drive motor assembly removal
1. Remove the left left cover. See
2. Disconnect the paddle motor harness from the controller card.
3. Remove the cable from the harness clip.
"MFP stapler assembly left cover removal" on page
A
"MFP stapler assembly left cover removal" on page
7462
4-204.
4-204.
4-213
Repair information
Previous
Next
Go Back