5026
HCIT drawer slide assembly removal
The left and right drawer slide assemblies are the same, and only one is in a package. The instructions below
are for removing the left slide, but removing the right slide is similar.
Remove the HCIT media tray assembly. See
1.
2.
Remove the three screws (A) securing the HCIT drawer slide to the side frame.
Remove the HCIT drawer slide.
3.
HCIT elevator motor with sensor removal
Remove the HCIT right cover. See
1.
Disconnect the connector (A) from the HCIT controller board.
2.
Service Manual
4-198
"HCIT media tray assembly removal" on page
A
"HCIT right cover removal" on page
A
4-191.
4-194.
Previous
Next
Go Back