Sensor (Adf Lower Door Interlock) Removal - Lexmark MB790MFP Service Manual

Sensor (ADF lower door interlock) removal

1. Remove the ADF cover, front. See
2. Remove the ADF platen cushion. See
3. Open the bottom door assembly.
4. Remove the sensor by squeezing the tabs (A) and removing it from the front of the ADF frame.
5. Disconnect the lower sensor (ADF lower door interlock) harness.
6. Remove the sensor (ADF lower door interlock).
Sensor (ADF 2nd scan) removal
1. Remove the ADF media pinch pad assembly. See
page 4-74.
2. Remove the sensor (ADF 2nd scan) harness from the sensor.
3. Remove the sensor from the pinch pad mounting bracket assembly by squeezing the tabs (A) on the
sensor.
"ADF cover, front removal" on page
"ADF platen cushion removal" on page
A
A
"ADF media pinch pad assembly removal" on
A
A
7462
4-64.
4-68.
4-81
Repair information
Previous
Next
Go Back