Applicable Standards - ABB IRB 1410 Product Manual

7 Reference information

7.2 Applicable standards

7.2 Applicable standards
Standards, EN ISO
The manipulator system is designed in accordance with the requirements of:
Standard
EN ISO 10218-1:2011
EN ISO 12100:2010
EN ISO 13849-1:2008
EN ISO 13850:2008
EN ISO 13857:2008
EN ISO 60204-1:2008
EN 349
EN 614-1
Standards, EN ISO
The product is designed in accordance with the requirements of:
Standard
EN ISO 12100:2010
EN ISO 13849-1:2015
EN ISO 13850:2015
EN ISO 10218-1:2011
ISO 9787:2013
ISO 9283:1998
EN ISO 14644-1:2015
EN ISO 13732-1:2008
EN 61000-6-4:2007 +
A1:2011
IEC 61000-6-4:2006 +
A1:2010
(option 129-1)
EN 61000-6-2:2005
IEC 61000-6-2:2005
Continues on next page
140
Note
The listed standards are valid at the time of the release of this document. Phased
out or replaced standards are removed from the list when needed.
i
© Copyright 2006-2018 ABB. All rights reserved.
Description
Robots for industrial environments – Safety requirements
Safety of machinery – General principles for design - Risk as-
sessment and risk reduction
Safety of machinery – Safety-related parts of control systems
Safety of machinery – Emergency stop - Principles for design
Safety of machinery – Safety distances to prevent hazard zones
being reached by upper and lower limbs
Safety of machinery – Electrical equipment of machines
Safety of machinery – Minimum gaps to avoid crushing of parts
of the human body
Safety of machinery, ergonomic design principles
Description
Safety of machinery - General principles for design - Risk as-
sessment and risk reduction
Safety of machinery, safety related parts of control systems -
Part 1: General principles for design
Safety of machinery - Emergency stop - Principles for design
Robots for industrial environments - Safety requirements -Part
1 Robot
Robots and robotic devices -- Coordinate systems and motion
nomenclatures
Manipulating industrial robots, performance criteria, and related
test methods
Classification of air cleanliness
Ergonomics of the thermal environment - Part 1
EMC, Generic emission
EMC, Generic immunity
Product manual - IRB 1410
3HAC026320-001 Revision: N