Table of Contents
Advertisement
Operation
3. Insert new needle into the holes of the needle holders (1) until they
Important
The groove of the left needle (4), as viewed from the operator side of
the machine, must point to the left, while the groove of the right needle (5)
must point to the right (see diagram).
4. Tighten the screws (3).
4.6 Threading the needle thread
Fig. 7: Threading the needle thread
(1) - Reel stand
Left needle thread
To thread the left needle thread:
1. Swivel the folding station to the side ( p. 16).
2. Fit the thread reel on the reel stand (1).
3. Feed the thread from the thread reel through the holes (2).
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
reach the stop.
CAUTION
Risk of injury from sharp parts!
Punctures possible.
Only thread the needles with the machine switched
off.
①
②
(2) - Holes
19
Advertisement
Table of Contents
