Lubricate The Wicks And The Felt Parts; Regulating The Hook Lubrication - DURKOPP ADLER 577 Series Manual

8.2

Lubricate the wicks and the felt parts

8.3

Regulating the hook lubrication

18
Lubricate the machine head
2
–
Fill the supply container 2 through the filling hole up to the mark
"max".
Before the first use of the machine and after its long stops it is
adviseable to slightly lubricate the wicks and the felt parts.
NOTE !
For ensuring a sufficient lubrication during the run-in period, a rather
high oil supply quantity has been set by the factory.
Check the setting and correct it after the run-in period, if necessary
( see the Service Instructions ).
3
–
The oil supply quantity can be regulated by the screw 3
( see the Service Instructions ).