Assigning Functions To The Knee Button; Assigning Fullness To The Knee Button - DURKOPP ADLER 670 Operating Instructions Manual

52
5.2

Assigning functions to the knee button

Fig. 28: Assigning functions to the knee button
①
(1) - Toggle switch
The knee button can be assigned 2 different functions.
The functions are selected in sewing mode via the position of the
knee button (1) (up/down).
The top position has been assigned the stitch loosening device at
the factory.
5.2.1

Assigning fullness to the knee button

To assign fullness to the knee button:
1. Press the
2. Press the knee button to the desired position (down).
3. Keep the knee button pressed for 1 second.

flashes.
The display shows a numerical value.
button.
Operating Instructions 670/680 - 00.0 - 01/2017
Programming