Order Number Confirmation - YASKAWA MOTOMAN-HP20 Instructions Manual

1.2

Order Number Confirmation

Check that the order number of the manipulator corresponds to the NX100. The order num-
ber is located on a label as shown below.
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
NX100 ******
TYPE ERCR-
POWER SUPPLY
200V 50Hz
220V 50/60Hz 3PHASE kVA
SERIAL No.
DATE
MADE IN JAPAN NJ2484-1
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
NJ1529
WARNING
Do not open the door
(a) NX100 (Front View)
Label (Enlarged View)
Fig. 1 Location of Order Number Labels
1-2
1.2 Order Number Confirmation
Check that the manipulator
and the NX100 have the
same order number.
(b) Manipulator (Top View)