170904-1CD
II
MPL80
1.2
1
Product Confirmation
1.2 Order Number Confirmation
Order Number Confirmation
Check that the order number of the manipulator corresponds to the
DX200. The order number is located on a label as shown below.
Fig. 1-1: Location of Order Number Labels
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
(a) DX200 (Front View)
1-2
Label (Enlarged View)
Check that the manipulator
and the DX200 have the
same order number.
(b) Manipulator (Side View)
HW1482870
17 of 81