2.2
Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets at sections A and B. ("Fig. 2
Transporting Position")
A
Enlarged View: Section A
Parts Drawing for Section A
• The brackets in the sections A and B are painted yellow.
• The section A is fixed with a hexagon socket head cap screw M8, and the section B is
fixed with two hexagon socket head cap screws M6.
• A rubber cushion is respectively wedged at the sections C and D.
Before turning ON the power, check to be sure that the shipping bolts, brackets, and rubber
NOTE
cushions have been removed. The shipping bolts, brackets, and rubber cushions then
must be stored for future use, in the event that the manipulator must be moved again.
Eyebolts M12 (2 eyebolts)
(delivered with the manipulator)
C
Enlarged View: Section C
Parts Drawing for Section B
2-4
2.2 Shipping Bolts and Brackets
B
D
Enlarged View: Sections B and D