Tftp Firmware Updates; Updating Firmware Using Tftp - ADTRAN Atlas 550 User Manual

TFTP FIRMWARE UPDATES

Updating Firmware using TFTP

61200305L1-1
Instructions for Updating Firmware Using XMODEM (Continued)
Step
From the terminal emulation software, begin the XMODEM upload
by using the appropriate command sequence. (If necessary, refer
to your terminal emulation software documentation for help. Also,
when specifying the filename, ensure that the file transferred is the
one provided by ADTRAN; otherwise, the update will not complete
successfully.)
8
Because XMODEM data is being transferred in-band through the
menu interface, the VT-100 menus of ATLAS 550 will be
inoperable from the Control/Chain In port. You can cancel the
update at any time within the terminal emulation software. (Please
consult the documentation provided by the terminal emulation
software to determine how to do this.)
To update additional modules, begin at step 3 and repeat this
9
process.
When the update process has successfully completed,
C U S
URRENT PDATE TATUS
P U S
REVIOUS PDATE TATUS
resumes operation, or it restarts at the specified time and day of the week—
depending on your selection.
If an error occurred during the update process, P
displays an appropriate error message.
ATLAS 550 supports firmware updates to any module via the Ethernet port
using TFTP from a network server. The network server must be capable of
supporting TFTP Server requests from the TFTP client within ATLAS 550.
Before beginning this procedure,
• you must have a level 1 password to perform updates of any modules
within ATLAS 550. Please consult the ATLAS 550 administrator if this
password is not known.
• you must obtain the appropriate update file for the particular module
from the ADTRAN web page, www.adtran.com, in the support section.
• you must copy the update file provided by ADTRAN to a network serv-
er that supports TFTP Server requests. Record both the IP address of the
server and the full path location of the update file to be downloaded.
ATLAS 550 User Manual
Chapter 12. Updating Firmware
Action
field and
Module Update Complete
field. Either the module restarts immediately and
REVIOUS
displays in the
Idle
displays in the
U S
PDATE TATUS
12-3