Date/Time Properties - NEC US110 User Manual

44 Using Features of US110

Date/Time Properties

Use this dialog box to set date, time, or time zone.
Setup each item according to the following guidelines.
Date
Click an arrow mark (left or right) in the box to select a month. Then, put a cursor onto
the desired day.
Current Time
Put a cursor onto Time, Minute, or Second. Then use click arrow mark (up or down) to
select a value.
Time Zone
Select a time zone where the US110 is located. The defaults are Osaka, Sapporo, and
Tokyo.
Automatically adjust clock for daylight saving
This checkbox becomes active if the time zone having the daylight saving time is selected.
When you specify each necessary parameters and click [Apply], the definition you have made is
applied to the system.
NOTE:
powered. At the next power-on, the default value "00:00:00, July 1,
2007" is used. By configuring SNTP on US110, the system time is
synchronized with SNTP server at the startup of US110.
Figure 2-21 Date/Time Properties
The US110 does not retain the system time when it is off-