Attach Swing End To Swing Beam - KidKraft Summerhill F29050 Installation And Operating Instructions Manual

Step 8: Attach Swing End to Swing Beam
A: Place Swing End Assembly against Swing Beam Assembly then place 1 Beam Bracket on each side of the
assembly (they are specific for left and right side) and attach with 5 (G21) 5/16 x 3-3/4" Hex Bolts (with 2 flat
washers and 1 lock nut). (fig. 8.1 and 8.2)
Fig. 8.1
Swing End
Assembly
Swing Beam
Assembly
Fig. 8.2
LN2
FW2
Swing End
Assembly
Hardware
5 x Hex Bolt
G21
(flat washer x 2, lock nut)
30
Beam
Bracket
Swing Beam
Assembly
G21
Other Parts
2 x Beam Bracket (Left/Right)