Attach Nest Walls - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 61: Attach Nest Walls
A: From the inside, place 15 (611) Nest Wall Rails around the 4 openings in the Upper Nest Walls as shown in
fig. 61.2, taking care to ensure that the boards are evenly spaced. Attach each rail from the outside at the top
using 1 (H1) 1/4 x 1-1/2" Pan Head Bolt (with lock washer, flat washer and t-nut). (Fig. 61.1 & 61.2)
B: Double check to ensure that all Nest Wall Rails are level and straight and attach the bottom of the boards
from the inside using 2 (S20) #8 x 1-3/8" Wood Screws per board. (Fig. 61.1 & 61.2)
Fig. 61.1
1/4" T-Nut
x 2 per
S20
board
Wood Parts
15 x Nest Wall Rails 5/8 x 3-3/8 x 32"
611
H1
1/4" Lock
Washer
1/4" Flat
Washer
x 15
611
Fig. 61.2
Hardware
30 x #8 x 1-3/8" Wood Screw
S20
15 x 1/4 x 1-1/2" Pan Head Bolt
H1
(with 1/4" flat washer, 1/4" lock washer and 1/4" t-nut)
112
611