Attach Swing Assembly To Fort - KidKraft TREASURE COVE Installation And Operating Instructions Manual

Step 9: Attach Swing Assembly To Fort
A: Place Swing Assembly against top of (2630) SW Top, make sure assembly is level then attach from inside
the fort assembly into each L-Beam Bracket with 4 (G8) 5/16 x 2" Hex Bolts (with 2 flat washers and 1 lock
nut). (fig. 9.1)
Fig. 9.1
G8
FW2
4 x
L-Beam
Bracket
LN2
Hardware
5/16 x 2" Hex Bolt
G8
(5/16" flat washer x 2, 5/16" lock nut)
32
2630
Swing
Assembly