Attach Swing Top Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 43: Attach Swing Top Assembly
A: Tight to the top of (050) SW Wall Panel and flush to the outside of each (420) Wall Support place Swing Top
Assembly then attach (420) Wall Supports to (411) Swing Side Uprights with 2 (S3) #8 x 2-1/2" Wood Screws per
support. (fig. 43.1)
Flush
Swing Top Assembly
Fig. 43.1
Flush
S3
420
411
S3
420
050
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
92