Attach Wall Tops - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 8: Attach Wall Tops
A: In the opening of (050) SW Wall Panel, from the inside, attach (080) SW Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 8.1 and 8.2.
B: Attach (080) SW Wall Top to slat in (050) SW Wall Panel with 1 Corner Bracket using 3 (S37) #7 x 5/8" Pan
Screws. (fig. 8.1 and 8.3)
C: In the opening of (040) Slide End Panel, from the inside, attach (081) Half Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 8.1 and 8.2.
D: Attach (081) Half Wall Top to slats in (040) Slide End Panel with 2 Corner Bracket using 3 (S37) #7 x 5/8"
Pan Screws per bracket. (fig. 8.1 and 8.3)
Tight
Fig. 8.2
Inside View
081
Fig. 8.1
040
Wood Parts
1 x SW Wall Top 5/4 x 3 x 33-1/2"
080
1 x Half Wall Top 5/4 x 3 x 33"
081
S11
x 1 per end
per board
Slat
Fig. 8.3
Inside View
Corner
Bracket
Hardware
S11
4 x #8 x 2" Wood Screw
9 x #7 x 5/8" Pan Screw
S37
32
Slat
3 x Corner Bracket
S37
x 3 per
bracket
080
050
Other Parts