Attach Rock Wall Assembly To Fort - KidKraft TREASURE COVE Installation And Operating Instructions Manual

Step 14: Attach Rock Wall Assembly to Fort
Part 1
A: Place Rock Wall Assembly centred in opening of the Back Wall and flush as shown below. Attach (2776) Rock
Rails to the Front Wall using 4 (S11) #8 x 2" Wood Screws. (fig. 14.1 and 14.2)
B: Attach 1 (2779) Access Board to top of Rock Wall Assembly, flush to top of (2776) Rock Rails using 4 (S20) #8
x 1-3/8" Wood Screws. (fig. 14.3)
Note: Make sure (2776) Rock Rails do not cover the bolt head, move assembly over so it is tight to the bolt
head. (fig. 14.1 and 14.2)
S11
2776
Wood Parts
1 x Access Board 1 x 6 x 19"
2779
Fig. 14.1
S11
Fig. 14.3
2779
S20
2776
S20
Panel
Flush
Flush
Hardware
4 x #8 x 1-3/8" Wood Screw
S20
4 x #8 x 2" Wood Screw
S11
37
Fig. 14.2
Bolt
Head
2776
2776
S11