Attach Swing Wall Gussets - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 13: Attach Swing Wall Gussets
Note: Pre-drill all holes using a 3/16" drill bit before installing the lag screws.
A: Tight to the bottom of (2188) SW End and top bevelled edge flush to outside edge of (2180) Posts, attach 1
(2113) Gussett II to each side using 2 (LS3) 1/4 x 3" Lag Screws (with flat washer) per gusset. (fig. 13.1)
Fig. 13.1
2113
Flush
2180
Wood Parts
2 x Gusset II 5/4 x 4 x 18-1/2"
2113
1/4" flat
washer
LS3
Swing Wall
Hardware
4 x 1/4 x 3" Lag Screw (1/4" flat washer)
LS3
1/4" flat
washer
37
2188
2113
2180
Flush