Front Wall Assembly; Fig. 8.1 - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 8: Front Wall Assembly
Part 1
A: Loosely attach 1 (2180) Post, (2179) Door Post and 1 (2336) Centre Post to (2343) Ground Front with 2 (H2)
1/4 x 2" Hex Bolts (with lock washer, flat washer and t-nut) in each board. Ensure that you maintain a 27-5/8"
spacing between the two boards, as shown in fig.8.1. Make sure the bevelled end of (2180) Post is facing up.

(fig. 8.1)

B: Loosely attach (2164) Floor Support to (2180) Post, (2179) Door Post and (2336) Centre Post with 1 (H11)
1/4 x 2-3/4" Hex Bolt (with lock washer, flat washer and t-nut) per board. Notice direction bolts are installed. (fig.
8.1)
Fig. 8.1
Inside View
2164
Wood Parts
1 x Ground Front 1 x 6 x 55-1/4"
2343
1 x Post 2 x 4 x 103-3/4"
2180
1 x Door Post 2 x 4 x 57-1/16"
2179
1 x Centre Post 2 x 4 x 88-3/4"
2336
1 x Floor Support 2 x 4 x 69-1/2"
2164
Notice bevelled
edge facing up
2180
H11
27-5/8"
2179
2343
1/4" t-nut
6 x
H2
3 x
H11
2336
H2 x 6
1/4" flat
washer
1/4" lock
washer
Hardware
1/4 x 2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4 x 2-3/4" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
29
Notice bolt direction in
(2164) Floor Support