Sensor Connector - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Sensor connector

6 Sensor connector
User qualification, sensor connector:
n
trained and qualified personnel
Ä Chapter 3.4 'User qualification'
on page 15
Shielded sensor cable
All conductivity sensors connected
to the controller require shielded
sensor cables.
Many conductivity sensors have
total shielding. The conductivity
sensors ICT 1 have an internally
connected total shielding.
Connect the sensor in accordance with
the terminal diagram.
Ensure that the controller is
not electrically connected
Ensure that the controller is not
electrically connected when the
sensor is installed, as the controller
could otherwise be damaged.
Selection of the connected
sensor
All of the sensor-dependent set‐
tings are reset to the [DEFAULT]
values of the controller when
changing the sensor connected.
42