Intended Use - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Safety and responsibility
NOTICE!
Correct sensor operation
Damage to the product or its sur‐
roundings
– Correct measuring and dosing
is only possible if the sensor is
working perfectly
– Check and calibrate the
sensor regularly
NOTICE!
Compensation of control deviations
Damage to the product or its sur‐
roundings
– This controller cannot be used
in control circuits which require
rapid compensation (< 30 s)
14
3.3

Intended Use

NOTICE!
Intended Use
The device is designed to measure
and regulate liquid media. The
designated measured variable is
detailed on the controller and is
absolutely binding.
The unit should only be used in
accordance with the technical data
and specifications provided in
these operating instructions and in
the operating instructions for the
individual components (such as
sensors, fittings, calibration
devices, metering pumps etc.).
Any other uses or modifications
are prohibited.
NOTICE!
Compensation for control devia‐
tions
Damage to the product or its sur‐
roundings
– The controller can be used in
processes, which require com‐
pensation of > 30 seconds