ProMinent DULCOMETER Assembly And Operating Instructions Manual page 27

Fig. 8: Fitting the profile seal on the bottom section of the controller housing
5. Position the profile seal evenly around the upper edge of bottom section of the
DULCOMETER
shown in the figure
ð Ensure that the profile seal evenly surrounds the upper edge of the housing.
6.
Insert the bottom section of the DULCOMETER
the profile seal from behind into the cut-out and use three screws to secure it in
place
Compact Controller housing. The clips (1) must be arranged as
®
Assembly and installation
1.
Compact Controller housing with
®
A0360
27