Entering Values - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Function
6. DOWN key
7. MENU key
8. STOP/START key
9. ESC key
10. CAL key
11. f-REL LED
12. P-REL LED
13. ERROR LED
8.2

Entering values

Described by the example of entering set‐
points in the Control menu.
※CONTROL
SET= 01.000
Fig. 19: Entering values
Description
To decrease a displayed numerical value and move down in
the operating menu
To access the controller's operating menu
Starts and stops the control and metering function
Moves one level back in the operating menu, without storing
or changing entries or values
Switches the measured variables in the continuous display.
To access the calibration selection menu (cell constant and
temperature coefficient) and navigate within the calibration
menu.
Shows the activated state of the f-relay
Shows the activated state of the P-relay
Indicates a controller error state. A text message is displayed
simultaneously in the LCD display of the continuous display
A1634
1. Use to select each position of
the value to be entered.
You can also select and
change the unit of the value
to be entered.
2. Enter the values using the
keys
3. : The value entered is transferred
to the memory.
4.
: Cancelling the input of values
without saving the entered value.
The original value is retained.
Operating diagram
and
51