Temperature Correction Variable - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Control parameters and functions
10.5 Temperature correction
variable
Available temperature
A temperature reading for the con‐
ductivity always has to be avail‐
able, either by a temperature
measurement or a manual tem‐
perature setpoint.
The correction variable compensates for
the effect of the temperature of the
medium on the measured value. The cor‐
rection variable is the temperature of the
medium to be measured.
Operating modes
[auto] : The controller analyses the
n
temperature signal from the tempera‐
ture sensor connected
– For measurements using a tem‐
perature sensor (0 ... 150 °C)
[manual] : The temperature of the
n
medium to be measured has to be
measured by the user. The deter‐
mined value is then entered using the
keys: and
parameter into the controller and is
saved using
– This setting is needed for meas‐
urements where the medium to
be measured has a constant tem‐
perature. The temperature is
taken into consideration in the
control.
92
[VALUE]
in the
.