ProMinent DULCOMETER Assembly And Operating Instructions Manual page 71

Setting
Starting
value
[CHECK‐
0 min
TIME]
[BOOT
30 s
DELAY]
1 = at an upwards direction with one-way control: 0 ...+ 100 % (setting with
[dosing↑] ), in a downward direction: - 100 ... 0 % (setting with [PUMP] : [dosing↓] ).
2 = When switching over the metering direction, all actuators in the controller are reset to
the factory settings for the selected metering direction.
Possible values
Increment Lower value
1 min 0 min
1 s 0 s
Operating menus
Upper Remark
value
999 min Control checkout
time
0 minutes = off
9999 s Control delay
period after the
start of the meas‐
uring point. After
it is switched on,
the unit only
measures during
this unit, but does
not control.
[PUMP] :
71