Pipe Mounting - ProMinent DULCOMETER Assembly And Operating Instructions Manual

5. Screw on the wall/pipe bracket
using the washers
6.
Suspend the DULCOMETER
Compact Controller at the top in the
wall/pipe bracket and push using
light pressure at the bottom against
the wall/pipe bracket. Then press
upwards until the DULCOMETER
Compact Controller audibly snaps
into position.
5.3.2

Pipe mounting

Mounting (mechanical)
Pipe diameter
Pipe diameter: 25 mm to 60 mm.
2
1
Fig. 3: Removing the wall/pipe bracket
1. Remove the wall/pipe bracket. Pull
the two snap-hooks (1) outwards
®
and push upwards
2. Fold out the wall/pipe bracket (2)
and pull out in a downwards direc‐
tion
®
3. Secure the wall/pipe bracket using
cable ties (or pipe clips) to the pipe
Fig. 4: Suspend and secure the
DULCOMETER
4.
Suspend the DULCOMETER
Compact Controller at the top (1) in
the wall/pipe bracket and push
using light pressure at the bottom
(2) against the wall/pipe bracket.
Then press upwards (3) until the
DULCOMETER
troller audibly snaps into position
A0273
Assembly and installation
1
3
Compact Controller
®
® Compact Con‐
2
A0275
®
21