Control Panel Mounting - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Assembly and installation
5.3.3

Control panel mounting

Tab. 3: Mounting kit for control panel installation of the DULCOMETER
troller: Order number 1037273
Description
Drilling template sheet 3872-4
PT screw (3.5 x 22)
Profile seals
Strain relief strip DF3/DF4
PT screw (3.5 x 10)
M4x30* fillister head screws
Individual parts packed in transparent bag / Mounting kit is not contained in the
standard scope of supply
* The M4x30 fillister head screws should be used when mounting the control panel if
the thickness of the control panel does not allow the top section of the controller
housing to be securely attached with the screws used as standard.
CAUTION!
Material thickness of control panel
Possible consequence: Material damage
– The thickness of the material of the control panel should be at least 2 mm to
ensure secure fixing
In the mounted state, the DULCOMETER
30 mm from the control panel.
22
Quantity
1
3
2
1
2
4
® Compact Controller extends approx.
Compact Con‐
®