Table of Contents
Advertisement
Mounting and Installation
Figure 9 Use a screwdriver to break open a sealed enclosure entrance
Figure 10 Examples of cable gland assembly.
1. Plug, 2 Cap, 3. Gland, 4. Connector Body, 5. Nut
6.3.2 Sensor Seals and Termination Procedure
Select the correct fitting seals for the controller's cable openings. Seal the open holes with blanking plugs in the cord glands
as shown. This is the only way to ensure an acceptable air and moisture seal. Non-sealing dust caps are not effective for
preventing non-warranty damage from moisture, corrosion or insects.
Page 23 of 102
Advertisement
Table of Contents
