Assembly and installation
5
Assembly and installation
5.1
Scope of delivery
The following parts belong to the standard scope of delivery of a DULCOMETER
pact Controller.
Description
Assembled device
Cable connection set DMTa/DXMa (metr.)
Operating instructions
5.2
Assembly and installation
User qualification, mechanical instal‐
n
lation: trained qualified personnel, see
Ä Chapter 3.4 'User qualification'
on page 15
User qualification, electrical installa‐
n
tion: Electrical technician, see
Ä Chapter 3.4 'User qualification'
on page 15
CAUTION!
Possible consequence: Material
damage.
The hinge between the front and
rear part of the housing cannot
absorb high levels of mechanical
loading. When working on the con‐
troller, hold the top section of the
controller housing firmly.
18
Quantity
1
1
1
NOTICE!
Mounting position and conditions
–
Only carry out the (electrical)
installation after the (mechan‐
ical) installation
–
Ensure that there is unim‐
peded access for operation
–
Ensure safe and low-vibration
fixing
–
Avoid direct sunlight
–
Permissible ambient tempera‐
ture of the controller at the
installation location: - 10 ...
60℃ at max. 95 % relative air
humidity (non-condensing)
–
Take into consideration the
permissible ambient tempera‐
ture of the sensors connected
and other components
Com‐
®