Pipe Mounting - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Assembly and installation
5.2.2

Pipe mounting

Mounting (mechanical)
Pipe diameter
Pipe diameter: 25 mm to 60 mm.
2
1
24
Fig. 5: Removing the wall/pipe bracket
1. Remove the wall/pipe bracket. Pull
the two snap-hooks (1) outwards
and push upwards
2. Fold out the wall/pipe bracket (2)
and pull out in a downwards direc‐
tion
3. Secure the wall/pipe bracket using
cable ties (or pipe clips) to the pipe
A0273
Fig. 6: Suspend and secure the
DULCOMETER
4.
Suspend the DULCOMETER
Compact Controller at the top (1) in
the wall/pipe bracket and push
using light pressure at the bottom
(2) against the wall/pipe bracket.
Then press upwards (3) until the
DULCOMETER
troller audibly snaps into position
1
2
3
Compact Controller
®
® Compact Con‐
A0275
®