Table of Contents
Advertisement
Mounting and installation
4
Mounting and installation
Indoors or protective covering
The device is only intended for use
indoors. When using outdoors, provide
a protective housing to offer protection
against the weather and sunlight (UV
radiation).
Load-bearing strength of the wall
Ensure that the wall has sufficient load-
bearing strength to ensure that the
device can be safely mounted.
Assemble the device using 3 screws.
User qualification, mechanical and
n
hydraulic installation: trained qualified per‐
Ä Chapter 2.4 'User qualification'
sonnel
on page 15
User qualification, electrical installation:
n
Electrical technician
qualification' on page 15
4.1
Ambient conditions
Permissible ambient temperature: 1 ... 40 °C
Permissible medium temperature: 10 ... 45 °C
Air humidity: < 95% relative humidity, non-con‐
densing
Humidity: None. Avoid rain and condensation.
Other: No dust, no direct sunlight.
18
Ä Chapter 2.4 'User
Advertisement
Table of Contents
