Assembly And Installation - ProMinent DULCOMETER Assembly And Operating Instructions Manual

5

Assembly and installation

User qualification, mechanical instal‐
n
lation: trained qualified personnel, see
Ä Chapter 2.2 'Users' qualifications'
on page 10
User qualification, electrical installa‐
n
tion: Electrical technician, see
Ä Chapter 2.2 'Users' qualifications'
on page 10
CAUTION!
Possible consequence: Material
damage.
The hinge between the front and
rear part of the housing cannot
absorb high levels of mechanical
loading. When working on the con‐
troller, hold the top section of the
controller housing firmly.
NOTICE!
Mounting position and conditions
– The (electrical) installation
should only take place after
(mechanical) installation
– Ensure that there is unim‐
peded access for operation
– Ensure safe and low-vibration
fastening
– Avoid direct sunlight
– Permissible ambient tempera‐
ture of the controller at the
installation location: - 10 ...
60℃ at max. 95 % relative air
humidity (non-condensing)
– Take into consideration the
permissible ambient tempera‐
ture of the connected sensors
and other components
Assembly and installation
Read-off and operating posi‐
tion
Mount the device in a favour‐
–
able position for reading and
operating (preferably at eye
level)
Mounting position
Leave sufficient free space for
–
the cables
Packaging material
Dispose of packaging material in
an environmentally responsible
way. All packaging components
carry the corresponding recycling
code .
19