gefran VDI100 Series Instruction Manual page 252

Steps
Edit
3
0
(0 – 3)
< 0 >
Edit
4
3
(0 – 3)
< 0 >
-ADV-
5
-ADV-
6
Edit
7
3
(0 – 3)
< 0 >
Code Parameter Name / Range
16-09 Selection of keypad removed (LCD)
0: Keep operating when LCD keypad is removed.
1: Display fault when LCD keypad is removed.
16-09=0: Continue operating when keypad is removed.
16-09=1: Trip inverter when keypad is removed while operating in local mode.
252
Keypad (English)
16-07
Copy Sel
Press the Read / Enter key to display the data setting / read screen (LCD display is
inversed).
Normal
16-07
Copy Sel
Change the set value to 3 (verify) by using the up arrow key.
VERIFY
VERIFY
• Use Read / Enter key to enable the read operation, the display is shown as the left.
INV → OP
• The bottom of LCD display will show a bar to indicate the read progress.
VERIFY
"VERIFY COMPLETE" will be displayed on the keypad when writing was successful.
COMPLETE
• The error message of "VRYE Verify Error " may occur on the keypad when writing
VRYE
parameters to the inverter is prohibited.
Verify Error
• If the error is displayed, press any key to remove the error message and go back to
parameter 16-07.
16-07
Copy Sel
When DSP/FUN key is pressed, the display returns to parameter 16-07.
VERIFY
Description
VDI100 • Instruction manual