Power-Up Monitor - gefran VDI100 Series Instruction Manual

4.1.4.

Power-up Monitor

• Power-up
Display at Power-up
• Changing Monitor at Power-up
12-00
Range
Example: 12-00=[10000]
Display Voltage Class
at Power-up
Example: 12-00=[12345]
Heatsink Temperature <4>
Display Voltage Class
at Power-up
48
After 3 sec.
Frequency Reference
Highest bit -> 0 0 0 0 0 <- Lowest bit
The setting range for each bit is 0 ~ 7 from the highest bit to the lowest bit.
0: No display
1: Output current
2: Output voltage
3: DC voltage
After 3 sec.
Output Current
DSP/FUN
Frequency Reference
DSP/FUN
PID Feedback <5>
DSP/FUN
After 3 sec.
Frequency Reference
DSP/FUN
Parameter Selection
DSP/FUN
DSP/FUN
Switch
Mode
Parameter Selection
Display Selection
4: Temperature
5: PID feedback
6: AI1 value
7: AI2 value
DSP/FUN
Parameter Selection
DSP/FUN
Switch
Mode
DSP/FUN
DSP/FUN DC Voltage <3>
Output Voltage <2>
DSP/FUN
Output Current <1>
DSP/FUN
VDI100 • Instruction manual