gefran VDI100 Series Instruction Manual page 310

General purpose full vector inverter

Hide thumbs Also See for VDI100 Series:

Table of Contents

If the motor rotation is incorrect, power down the inverter.

After the power has been turned OFF, wait at least ten minutes until the charge indicator extinguishes com-

pletely before touching any wiring, circuit boards or components.

Using Safety precaution, and referring to section 3.8 exchange any two of the three output leads to the

motor (U/T1, V/T2 and W/T3). After the wiring change, repeat this step and recheck motor direction.

Fig 5.3: LCD Keypad (Stopped)

Fig 5.4: LCD Keypad (Running)

VDI100 • Instruction manual

Show Quick Links

Chapters

Table of Contents