Exhaust Area; Battery - Can-Am Maverick Operator's Manual

MAINTENANCE PROCEDURES
vmr2007-051-006_a
1. Arrow printed on belt
2. Drive pulley (front)
3. Driven pulley (rear)
4. Rotation direction
NOTE: Turn the driven pulley until the
lowest portion of the cogs on the exter-
nal surface of drive belt is even with the
driven pulley edge.
tmo2013-003-060_a
1. Lowest portion of cogs even with external
surface of drive belt

Exhaust Area

Exhaust Area Access
To access exhaust area, refer to
COVER ACCESS
lateral console panel and underseat
compartment on driver's side
______________
96
CVT
for removal of LH
Exhaust Area Cleaning
WARNING
Engine and exhaust must be cool
before removing debris. Always
wear protective gloves when re-
moving debris.
1. Wearing gloves, hand remove all ex-
cess debris around exhaust.
tbg2013-002-400
2. Using a garden hose, thoroughly
clean the area so that no more de-
bris can be in contact with the ex-
haust.

Battery

Battery Maintenance
NOTICE
Never charge a battery
while installed in vehicle.
These vehicles are equipped with a
VRLA battery (Valve Regulated Lead
Acid). It is a maintenance-free type
battery, there is no need to add water
to adjust electrolyte level.
NOTICE
Never remove the battery
sealing cap.
Battery Removal
To access the battery, remove the
screws, nuts and access cover.